SILMADELOW FRICTION

Innovative coating for a reduced coefficient of friction

Due to its properties and high elasticity, silicone is valued and widely used at both high and low temperatures. However, the high coefficient of friction (COF) of silicone presents us with challenges.

Previous coating methods for reducing the coefficient of friction had a negative effect on the flexibility of the silicone part. Due to the high coefficient of friction, protective coatings did not adhere well to the surface and rubbed off quickly.

Your task

Reduction of the coefficient of friction of silicone
Highly abrasion-resistant protective coating
Very good adhesion properties
Highly flexible and elastic
Less dirt and dust adhesion
Lightfast and resistant to chemicals

Our implementation

The polyurethane-based silmade^® Low Friction finish has greatly reduced friction values while remaining highly flexible. A special surface pre-treatment by Silcos ensures very good adhesion between the coating and the silicone surface.

The process is used for coating functional parts such as seals and O-rings, as well as for decorative surfaces such as bracelets and wearables.

silmade® low friction O-ring
lacquered strap including silmade® Low Friction coating

Reduction of the coefficient of friction by up to 70 %
Very good adhesion between the silicone surface and the polyurethane coating
Very abrasion and scratch resistant
Highly flexible and elastic
Temperature-stable up to 110°C (temporarily even higher)
Certified to EN ISO 10993-5 and DIN ISO 10993-10

Our summary

Highly flexible and elastic.

3D moulded parts and silicone foams that are coated with the silmade® Low Friction process have a high reduction in the friction coefficient, remain highly flexible and are particularly durable thanks to their high scratch and abrasion resistance.

Metallisierung in Farbe bei Zierring des Steuerungselements anhand eines Epilierers

Deceptively real: siloptics® PVD

Elegant metal look for plastic surfaces. Brilliant, exclusive and functional. Our coating solution not only gives plastics and elastomers a high-quality look, but also outstanding technical properties for a wide range of applications.